Slide Mounts
Twin 35mm
Slide Mounts |
|
Quickpoint 2" x 2" Slide Mounts |
Each snap-together mount consists of a white half (intended to face the projection lamp in a projector, to reflect heat) and a dark grey half (intended to face the projection lens, to reduce internal reflections), which has sticky strips above and below the film aperture to hold the film in place for mounting. The mounts are 1.9mm thick when assembled, and are similar in construction to the GEPE mounts that we have sold for many years, but without the metal mask or glass inserts. These mounts are packed in boxes of 100 at an economical price of $9.95 per 100. They come in three aperture sizes as shown below. Please note that the indicated sizes are the actual size of the apertures - not the "nominal" sizes often listed with slide mounts) We have been experimenting with these mounts for our own use, and have found them to be an excellent lower cost alternative to GEPE slide mounts for precision mounting for projection. The thickness of 1.9 mm is less than the nearly 3mm of GEPE and Wess mounts, but is still too thick for Carousel 140 slide trays. Use of the
80 slide Carousel trays is required.. |
|
|
|
All Quickpoint Mounts are $9.95 per box of 100 (1.4 lbs. per box) |
GEPE Professional quality 2" x 2" Slide Mounts |
GEPE slide mounts are one of the best precision mounts that we have found for 3-D slide projection. Each mount consists of two snap-together halves. Each half consists of a plastic frame, a sheet of ultra-thin glass, and a precision metal film mask. One half is white, and faces the projection lamps to prevent heat buildup. The other half is grey, to reduce internal reflections and assure a clean image. GEPE mounts fit all types of straight, circular and cube slide trays EXCEPT the Kodak Carousel 140 trays. No glass mounts from any source fit this size tray. The sizes we have available are as listed below: |
No. 6001 (24 x 36mm): The standard size for 35mm full-frame slides. |
No. 6101 (18 x 24mm): Half-frame format. For users of twin half-frame, Nimslo/Nishika/ImageTech cameras, or any beamsplitter systems (pairs to be cut apart) which produce two half-frame size images side-by-side in a normal 35mm frame. |
No. 6301 (24 x 24mm): For Stereo Realist Format combine one side of 6301 with one side of a vertically oriented 6801 (21 x 28mm) to easily create a 21 x 24mm opening - the closest match to standard Realist-format. This way Realist-format stereo camera users may separately mount slides for twin projector showings. This mount is also perfect for any situation where a square format is desirable, or for duplicates of Realist format slides which are enlarged slightly. |
No. 6801 (21 x 28mm): By using one half of a 6801 mount vertically oriented with one half of a 6301 mount, a Stereo Realist size opening (21 x 24mm) is easily created, as described above. A good choice where both vertical and horizontal cropping is necessary. Can also provide image height cropping of European fromat stereo slides. |
No. 6802 (24 x 32mm): This mount is 4mm narrower than full-frame 35mm making it a perfect solution where slight width cropping is necessary. This allows for mounting compensation when parallel convergence settings are used exclusively |
No. 6803 (24 x 28mm): This mount has the same size opening as "European" stereo mounts, and is perfect for separate 2" x 2" mounting of image pairs taken with the Verascope F40, Belplasca, Iloca I or FED stereo cameras. Easy to use, professional quality. |
All GEPE Mounts are $7.95 per box of 20 (0.5 lb. ea.) |
 |
Back to the Reel 3-D Enterprises Homepage |
 |
 |
No. 6923 (23 x 23mm aperture): Good for slightly enlarged Realist dupes, or for masking down
35mm format slides. The aperture is about 1mm too large for Realist format.
No. 6928 (23 x 28mm aperture): Perfect for 2x2 mounting of European format (Verascope F40,
Belplasca, Iloca 1, Fed Stereo) slides, or masking down full-frame slides.
No. 6935 (23 x 35mm aperture): For Full-Frame mounting. 1mm smaller than the actual film
image width.
